Next Previous Contents
- I tested this for only Slackware 2.3; for other distributions/versions the following numbers may vary.
- Diskspace: 28MB + 6.5MB/machine
- RAM: I am using X on 8 MB. For only 4MB swap is needed, I guess, which can be created -- separately for each machine -- in /tmp. Do not forget to run mkswap.
- Speed: I had no problems on a 486 DX2/66 with 8 Megs.
- I found a strange error: in the /dev subdirectory SunOS corrupted the device entries so I needed to rerun MAKEDEV by mounting the subdirectory onto a disk based Linux box. (The reason was the differences between the linux nfs and the SunOs nfs: both use 32 bit for the Major and Minor device number, but linux uses 16 bit wide fields for both, SunOs uses 14 bit wide field for Major and 18 bit wide filed for Minor device number.)
- When the diskless linux gets booted, there is only one route included in the routing table to the tftp server, so you need to set up correct routing tables. You have two choices here:
- Configure every rc.S for every machine by hand
- Use a bootp client package and write a generalized setup script
- Correct citation of related documents.
- SunOs is BSD based. Need to include SVR4 (e.g. Solaris) based server configuration.
- Although Linux is quite similar to SunOs as bootp/tftp server, a linux based server example might be usefull.
- Update this document to the current etherboot package.
- Show the differences between the nfs root patched kernel version 1.2.13 and the newest 1.3.x kernel, which contains the nfs-root patch.
- Need to try other ethercards than wd8013
- Include configuration information for bootpc, a bootp client for linux to set up the correct rooting tables.
- Typos and other errors: please, report to Thank you.
Next Previous Contents